Tools Needed:

• Smart display unit
• Mounting kit (base stand or suction cup mount)
• Smartphone
• Basic tools (screwdriver)
• Microfiber cloth (for cleaning the installation area)
• Alcohol wipes (to clean surfaces for better adhesion)
• User manual (specific to your smart display model)

Step-By-Step Installation Guide

Step 1: Mount the Display

Choose a suitable location on your dashboard or windshield to mount the display. Use the provided base stand or suction cup mount to secure the display in place. Ensure the display is within easy reach and visibility but does not obstruct your view of the road.

Detailed Instructions:

1) Clean the Mounting Surface: Use alcohol wipes to clean the area where you will mount the display. This ensures the adhesive pads or suction cups stick properly.

2) Position the Mount: Place the mount in your chosen location. For dashboard mounting, use the red adhesive pad provided. For windshield mounting, use the suction cup.

3) Attach the Display: Secure the display to the mount, ensuring it clicks into place. Use a screwdriver to tighten the screws. Adjust the angle for optimal visibility.

4) Check Visibility: Sit in the driver's seat and ensure the display is visible but not obstructing your view. Make adjustments as necessary.

Step 2: Power Up

Plug the display into your car's cigarette lighter adapter to power it up. Make sure the power cable is neatly routed and does not interfere with your driving.

Detailed Instructions:

1) Locate the Cigarette Lighter Adapter: Find the cigarette lighter adapter in your car, usually located on the dashboard or near the gear shift.

2) Route the Cable: Run the power cable from the display to the adapter, using cable management clips or zip ties to keep it tidy and out of the way.

3) Connect to Power: Plug the cable into the cigarette lighter. The display should power up immediately. If not, check the connection and ensure the ignition is on.

Step 3: Connect Your Phone

Use Bluetooth or a USB cable to connect your phone to the display. Follow the on-screen instructions to pair your device and configure CarPlay or Android Auto.

Detailed Instructions:

1) Enable Bluetooth: On your smartphone, go to the Bluetooth settings and ensure it is turned on.

2) Pair the Device: On your phone, navigate to the Bluetooth settings and select "Pair New Device." Find the display on the list of available devices and select it (It's usually called something like TFxxx_xxx or CAR-BT_xxxx).

3) Confirm the Connection: You may be prompted to enter a code or confirm the pairing on your phone. Follow the prompts to complete the connection.

4) USB Connection (Optional): If you prefer a wired connection, use a USB cable to connect your phone to the display. This also charges your phone while connected.

Step 4: Configure Settings

Once connected, configure the display settings to suit your preferences. This may include adjusting the brightness, volume, and audio output. Ensure that the navigation and communication apps are set up correctly.

Detailed Instructions:

1) Access Settings: On the smart display, go to the settings menu. This can be found on the home screen of the smart display.

2) Adjust Display Settings: Set the volume, brightness and contrast to comfortable levels. Select "Audio Out", the display will be set to speaker by default, but we highly recommend selecting Bluetooth (Car's speakers) or AUX for the best sound quality.

3) Configure Apps: Open the navigation and communication apps you plan to use (e.g., Google Maps, Apple Maps, WhatsApp). Ensure they are set up and permissions are granted.

4) Customize Preferences: Set your preferred language, units of measurement (miles or kilometers), and any other customization options available.

Step 5: Start Using

With the setup complete, you can start using your new smart display. Access apps, navigation, and more directly from the display, and enjoy a safer, more connected driving experience.

Detailed Instructions:

1) Test Voice Commands: Try using voice commands to make a call, send a message, or get directions. Ensure the voice recognition is working correctly.

2) Navigate: Enter a destination in your navigation app and start driving. Verify that the directions are clear and accurate.

3) Play Media: Open your music or podcast app and start playing something. Check the audio output settings from step 4 are complete.

4) Stay Connected: Make a test call or send a message to see how the smart display handles communication while driving.

By following these steps, you'll ensure that your smart display is installed correctly and ready to enhance your driving experience.

Setting Up the Rear Camera

1. Select a Mounting Location:

• Choose a location at the rear of your vehicle, typically above the license plate, on the bumper or behind the rear window.

2. Install the Camera:

• Use a drill to create mounting holes if necessary.
• Secure the camera with screws provided in the kit.

3. Route the Wiring:

• Route the camera wiring through the vehicle, following existing wire paths when possible to keep it concealed.
• Connect the camera wiring to the display unit as per the wiring diagram.

4. Test the Camera:

• Reconnect the car battery.
• Turn on the display unit and test the rear camera to ensure it is working correctly.

For more detailed instructions, we recommend watching this helpful video for setting up rear cameras.

Troubleshooting Common Issues

While smart displays are designed to be user-friendly, you may encounter some issues during installation or use. Here are some common problems and their solutions to help you troubleshoot effectively.

Connection Problems

Issue: Bluetooth Connection Fails

If your phone is not connecting to the display via Bluetooth, ensure that both devices have Bluetooth enabled and are discoverable.

Solution:

Restart Devices: Turn off Bluetooth on both the smart display and your phone. Restart both devices, then enable Bluetooth again.

Forget and Re-Pair: On your phone, go to Bluetooth settings, select the smart display, and choose "Forget this device." Re-pair your phone with the smart display.

Update Software: Ensure your phone has the latest software update installed.

Check Compatibility: Verify that your phone is compatible with the smart display model.

Issue: USB Connection Fails

If the USB connection between your phone and the smart display is not working, check the cable and ports for any damage.

Solution:

Inspect Cable and Ports: Ensure the USB cable is in good condition and the ports are clean and free of debris.

Use Original Cable: Use the original cable that came with your phone or a certified replacement.

Restart Devices: Restart both the smart display and your phone, then reconnect using the USB cable.

Update Drivers: Ensure the smart display has the latest drivers installed for USB connectivity.

Display Issues

Issue: Display Not Turning On

If the display is not turning on, ensure that it is properly connected to the power source and the power source is functioning.

Solution:

Check Power Connection: Ensure the display is securely plugged into the cigarette lighter adapter.

Test Power Source: Test the cigarette lighter adapter with another device to ensure it is working.

Inspect Fuse: Check the fuse in the cigarette lighter adapter and replace it if necessary.

Restart Device: If the display still does not turn on, perform a factory reset following the instructions in the user manual.

Issue: Display Flickering

If the display flickers or shows inconsistent brightness, there may be an issue with the power supply or the display settings.

Solution:

Check Power Supply: Ensure the power cable is securely connected and not damaged.

Adjust Brightness Settings: Go to the display settings and adjust the brightness level to see if it resolves the flickering.

Inspect Cables: Check all cables for signs of wear or damage. Replace any faulty cables.

App Compatibility

Issue: App Not Working

If an app is not working correctly on your smart display, there may be a compatibility issue or a problem with the app settings.

Solution:

Update App: Ensure the app is updated to the latest version.

Check Permissions: Go to the app settings on your phone and ensure all necessary permissions are granted.

Restart App: Close the app and restart it to see if the issue persists.

Reinstall App: If the problem continues, uninstall the app and then reinstall it from the app store.

Issue: App Crashes

If an app crashes frequently, it may be due to a software bug or a compatibility issue with the smart display.

Solution:

Clear Cache: Go to the app settings on your phone and clear the app cache.

Update Software: Ensure your phone has the latest software update.

Check for Alternatives: If the app continues to crash, consider using an alternative app that offers similar functionality.

Audio Issues

Issue: No Sound

If there is no sound coming from the smart display, check the audio settings and connections.

Solution:

Check Volume Levels: Ensure the volume on both the smart display and your phone is turned up.

Inspect Audio Cables: If using an auxiliary cable, ensure it is properly connected and in good condition.

Bluetooth Connection: If using Bluetooth, ensure the smart display is paired correctly with your phone.

Audio Settings: Go to the audio output settings on the smart display and ensure the correct output is selected.

Issue: Poor Sound Quality

If the sound quality is poor, there may be an issue with the audio settings or the connection.

Solution:

Check for Interference: Ensure there are no devices causing interference with the Bluetooth connection.

Use Quality Cables: If using an auxiliary cable, ensure it is of high quality and in good condition.

Update Software: Ensure your phone has the latest software update.

General Tips

General Tips for Troubleshooting

Refer to the User Manual: Always refer to the user manual that came with your smart display for specific troubleshooting steps.

Contact Support: If you are unable to resolve an issue, contact the manufacturer’s customer support for assistance.

Online Forums: Join online forums and communities related to your smart display model for tips and solutions from other users.

Regular Maintenance: Perform regular maintenance on your smart display, such as cleaning the screen and updating your phone, to ensure optimal performance.

For more troubleshooting help, visit our troubleshooting page.

By following these troubleshooting tips, you can resolve most common issues and enjoy a seamless and enhanced driving experience with your smart display.

Conclusion

Installing your UDrive Smart Display can transform your driving experience by integrating modern technology into your older car. Follow this detailed guide to ensure a smooth installation process and enjoy the enhanced features of your new smart display. For further assistance, refer to the user manual or contact our support team.

Contact Support | Explore Apple CarPlay & Android Auto Smart Displays